
Ordering a custom flag looks simple: send a logo, get a flag. But the choices you make on fabric, printing and finishing decide whether your flag still looks sharp after six months on a windy pole — or fades and frays in six weeks. This guide explains each decision in plain language, the way we explain it to buyers in our Istanbul factory every day.
1. Start with where the flag will fly
Everything follows from the location:
- Outdoor on a pole, flown every day — needs a fabric that flies easily, dries fast and resists UV.
- Indoor or ceremonial — needs rich colour and a premium look; durability against wind doesn't matter.
- Events and short campaigns — needs good value and fast production more than a long lifespan.
- Very windy sites (coast, high-rise roofs, motorways) — needs heavier fabric and stronger finishing.
Tell your manufacturer where and how long the flag will fly. A good factory will recommend the right specification instead of simply quoting the cheapest one.
2. Choose the right fabric
| Fabric | Best for | Notes |
|---|---|---|
| Knitted polyester 110–115 g/m² | Most outdoor flags | Light, flies in gentle wind, excellent print quality |
| Heavy / spun polyester | Long-term outdoor, windy sites | Feels like cotton, more durable, slightly heavier |
| 210D nylon | Giant flags, strong wind | Very strong for its weight |
| Satin | Indoor, desk, ceremonial | Shiny, deep colours, not for outdoor use |
| Mesh | Stadiums, facades | Wind passes through, reduces load on fixings |
For about 80% of corporate flags, knitted polyester is the right answer.
3. Pick the printing method
Dye-sublimation is the standard for custom flags today. The ink becomes a gas and bonds into the polyester fibres, so the colour sits inside the fabric rather than on top. It reproduces photos, gradients and small text, and it doesn't crack or peel.
Screen printing is economical for large quantities of simple designs with one to three flat colours — for example 10,000 hand-waving flags for a national day.
Sewn appliqué and embroidery are traditional methods for ceremonial and protocol flags, where a hand-made, premium look matters more than price.
4. Single-sided, mirror or double-sided?
- Single-sided (mirror image): printed on one side and the ink passes through, so the back shows a mirror image (text reads backwards). About 90–95% bleed-through. This is the most common and economical option.
- True double-sided: two printed layers with a blockout liner in between, so both sides read correctly. Heavier and more expensive, recommended when text or a logo must be readable from both directions.
If your logo has no text, mirror image is usually fine.
5. Finishing: how the flag attaches
The finishing has to match your pole:
- Rope and toggle or brass grommets for outdoor poles with a halyard.
- Pole sleeve for indoor poles, banner arms and feather flags.
- Fringe for ceremonial and indoor flags.
On outdoor flags, ask for a reinforced fly end (4 rows of stitching on the edge that flaps). This is where wear starts, and reinforcement can noticeably extend the flag's life.
6. Prepare your artwork
Send vector files (AI, EPS, PDF or SVG) and your Pantone colour references. If you only have a JPG or PNG, a professional flag factory can redraw it. Always ask for a digital proof showing your flag at the correct proportions before production — it is the easiest way to avoid surprises.
7. Sizes and proportions
The most common outdoor sizes are 100×150 cm and 150×225 cm (2:3 ratio). As a rule of thumb, the flag's length should be about one quarter to one third of the pole height. Read our flag size guide for a full chart.
8. Quantity and price
Unit prices fall sharply with quantity because set-up costs are spread across more pieces. With sublimation, however, even a single flag is economical — which is why most factories, including ours, have no minimum on printed flags.
Quick checklist before you order
- Location and how long it will fly
- Fabric
- Printing method
- Single or double-sided
- Size and finishing to match your pole
- Vector logo + Pantone codes
- Approved digital proof
Ready to order? Request a free quote and proof — our team replies within two working hours.
Need flags for your project?
Get factory-direct prices and a free proof within 24 hours.
Get a Quote WhatsApp

